Cocktails Neon Sign

I created the parts to utilise neon effect led light strips these are the ones I used

https://www.amazon.co.uk/dp/B0CFXZVJM2?ref=ppx_yo2ov_dt_b_product_details&th=1

I mounted mine on an A3 acrylic sheet, with the start and end of the word overhanging slightly.  I have included an A3 layout pdf to help with laying parts out. The led strips can only be cut every three LEDs ~25mm due to the common resistors on the strip so all parts have been designed to fit strips in multiples of 25mm except the dash and the dot on the i for which I had to extract the LEDs from the strip diffuser and rotate so that only one LED was in the part, the 2 extra ones hang out the back and were covered with heat shrink ( see pic below )