Ratchetting Finger Handcuffs (Print-in-Place)

Naughty fingers pinching a few too many Christmas cookies? Put a stop to that with these print-in-place fingercuffs. Just slip them over the first or second knuckle and squeeze the ratchet shut. They are sized for about 18mm dia. fingers, but you should be able to scale them up or down slightly to fit the offender at hand.

I printed these in PLA with 0.2mm layers, although most any filament should work as long as you have good bed adhesion (you don't want to be printing the chain links with a brim). Use a 0.4mm or smaller nozzle. They print in just a few minutes.

Update: I see CornBread posted his finger cuffs about 5 minutes before me - curses! Check them out too.