Remixed Polaroid Frame with Nail Hole

An upgraded version of Deluxe Designs Polaroid frame, which features a nail hole of 5mm so you can hang it on a wall. The Polaroid slides in from the top and is centered by the frame.

The frame works for the Polaroid 600 film and all films with the same dimensions.

Print Settings

• Any filament should work fine :)
• VERY GOOD LAYER ADHESION IS REQUIRED!
• Two perimeters should be sufficient, ~10% infill worked well for me.
• Depending on how good your printer handles bridging, I recommend tree support for the “window”.

Please consider liking and posting a make if you find this useful 🙂