Cat Litter Locker Refill Holder

Litter Locker replacement cartridge that's easier to refill and hold 3rd party bags.

Onshape Design: https://cad.onshape.com/documents/07ab47c35c3128c157430561/w/28c064530f865ed22cb78021/e/ce07d39cc888c5b0eef8d20f?renderMode=0&uiState=658acdcba6dbf37d9b7ddde1

Improvements over re-using an old cartridge:

• Doesn't break easily (every break can easily tear the bag)

• Easier to refill as the inner hole is slightly smaller than the original

• Top fits easier and more sturdy as the original single-use cartridges

Print-tips:

• Print the bottom part upside down

  • Doesn't need supports, a little bit hanging bridges are fine (there is a support structure included)

• You can print with the largest layer height possible (works with 0.32 structural)

Amazon links for “needed” material (these are not “referral” links)

• Litter Locker: https://www.amazon.de/-/en/gp/product/B07G89MQVF/

• Refill Bags: https://www.amazon.de/-/en/2/dp/B07882ZQ6N/