Drilling template for European cylinder lock

This tool is necessary when changing the type of lock with one that does not have the same key axis; the operation is more difficult to explain than to do.

Anyway:

• from the external side, drill with the hole saw using the hole in the TEMPLATE as the center (the wood and then, if there is one, the sheet metal);
• remove the TEMPLATE and insert the cylinder.

That's all!

Cost: 10 minutes of time for taking measurements, planning and drawing and only 20 cents for PLA, compared to at least €10 on ebay...

I hope this simple "tool" is useful to you.

Good print!
If you found it useful, and if you like, you can offer me a coffee!, it will be an extra motivation to continue designing.

Print Settings

Printer Brand:

Creality

Printer: 

Ender 3 Pro

Rafts:

No

Supports: 

No

Resolution:

0.20

Infill: 

40%

Filament: NO PLA NO Post-Printing =============

Category: Tools