Operating lever for XH18 Display

A operating lever for converting XH18 displays from twist shifter operation to lever operation.

This reduces the space required on the handlebar by approx. 30 mm.

Versions with different numbers of levers are available. (I prefer the TF design as it works in the same manner as the shifter on the other side of the handlebar.)

The lever is held in place by the handlebar grip (place the washer between grip and lever). If the handlebar grip cannot be screwed onto the handlebar or the display is to be mounted slightly away from the grip, a clamping ring can be used instead.

In the neutral position of the shifter, the F-lever should be next to the cable outlet.
When installing, ensure that the F-lever does not affect the function of the brake lever.

The XH18 display is often used with TSDZ2 and TSDZ2B pedelec motors from the company Tongsheng.

2023-12-28:

Versions added where the levers are rotated by 15° in the direction of the + lever or the - lever.
This means that 15° increments are now possible when aligning the levers instead of the previous 45°.

2024-01-01:

Update to V2. All V2 data are based on the former -15deg design.
TF and TTF design added.

2024-01-29:

Update to V3: Optimized shape and position of the levers. 
Minimalistic T-version added.

2023-02-04:

Washer thickened from 0.5 to 1 mm.

2023-03-11:

Minor modification to the T+ lever of the TTF-version