December 27, 2023
Description
I needed to supply my RPi4 from 24V truck battery, and after testing a few modules, this one seams to be the one, so I created a housing for it. As the board has no mounting holes, I have designed a lid that way to secure the module in place. M3 screws are used to fasten the lid to the bottom part. I printed it out of PETG to have some better thermal resilience, with 0.2 layer height.
JZK® 24 V/12V to 5V, 5A Buck Module: https://www.amazon.de/-/en/dp/B071ZRXKJY?psc=1&ref=ppx_yo2ov_dt_b_product_details
License:
Creative Commons — Attribution — Noncommercial — Share Alike
10
The Restless Maker
