Phone Holder Inspired by Avenged Sevenfold

Made with a Prusa i3 MK3 from PLA. Supports are needed, however the amount will be dependent on the build orientation. I've printed it in standard orientation.
Layer height: 0.1 mm

Infill: 15 % triangle
Temperature: 200 °C
Overhang treshold for supports: 37°
Speed for perimeters: 45 mm/s
Speed for small perimeters: 25 mm/s
Outer perimeters: 25 mm/s
Speed for infill: 80 mm/s
Speed for top infill: 40 mm/s
Speed for support: 50 mm/s
Printing time: 12 h 56 min
Size: 92*70*92 mm
Filament used: 82.67 g