December 27, 2023
Description
Captain America hueforge
No AMS needed, Just pause and change filament at layers.
Don't forget the frame.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Matte Scarlet Red Transmission Distance: 2
PETG JAYO White Transmission Distance: 6
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Blue
At layer #10 (0.88mm) swap to Scarlet Red
At layer #15 (1.28mm) swap to White for the rest.
I spend a lot of time designing and allow it all to be used for free (including commercially).
If you'd like to help me out, below are the possible ways. Thank you in advance!
https://www.buymeacoffee.com/dohara1985o
Venmo: Dohara1985
Paypal: @Dohara1985
License:
Creative Commons — Attribution
Dohara
