ELFA Case (magnetic)

Printed on a Bambu Lab A1, 0.2mm Standard profile, but changed speed settings as followed:

Outer wall speed: 150mm/s

Inner wall speed: 200mm/s

But you can also use your speed settings - My idea behind the changes was to maintain a consistent outer wall speed (excluding overhangs and finer structures). The print was done with PLA-CF. 

To ensure both case parts stay together, you need to press/glue in 4 5x3mm magnets. After that, you're ready to go. The spare pod is simply slid into the round bearing and then stored in the larger recess of the base.

Have fun.