December 28, 2023
Description
Get that St. Valentines Day vib…..
Filament PLA+ or better
Layer Height .16mm
Walls 6+
Infill 32%+
Print the AFG upside down with supports. Use support blockers as the inside of the foregrip is semi-hollow.
Non-Printed Hardware Needed:
2x M4x30mm Bolt (Can be ground down to 28mm, so it doesn't stick out the side)
2x M4 Hex Nut
License:
Creative Commons — Attribution — Noncommercial — NoDerivatives
11
KN16
