AMS Wall Mount - HEX!

This is a remix of the StefenWoX design with some adjustments for better fit and looks:

     -Tapered tabs for better fit

     -Redesigned shelf so AMS sits flat

     -Hexagon design to match HSW

     -Support for multiple AMS versions

There are multiple AMS designs out there so measure your AMS before printing. I've included two versions designed to fit my units, as well as drawing dimensions and STEP files for easy modification if yours measures differently.

Version 1 has three tabs and is designed to fit my original AMS unit that came in the X1 Combo (purchased June ‘23). Version 2 has two longer tabs and is designed to fit my second AMS unit (purchased December ’23)

UPDATE 1/20/24: I've added version 3 which is a new two-tabbed variation with the slot shifted closer to the rear by 7mm. Thanks to RoFu_269907 for providing measurements.

UPDATE 1/23/24: I've modified v3 by extending the outer tab 5.5mm for better fit, and changed the design slightly to avoid a weak point at the gap between tabs.

The included Files are for the left side. Just mirror the parts to print the right side. 

I printed with StefenWox's recommended settings: 5 Walls/Perimeters, 5 Top/Bottom, 35% [gyroid] infill with ABS.