VETERAN SHERMAN BUMPER STAND

Visit my Cults3D page for more designs

The bumper will click in place right over the arch of the front shell. Add velcro or double-sided tape as seen in the pictures to ensure a secure connection.

For the one piece design :
- I recommend printing it in TPU with at leats 5 wall and a high infill percentage.
- Printing it in PETG might also work but I haven't tried it

For the three pieces design :
- Print the main part in PETG and two TPU nubs with the recommended settings below.

For TPU :
- 4 bottoms
- 5 tops
- 4 perimeters
- 10% infill - Triangle
- Print with the hole facing up

For PETG :
- 3 bottoms
- 6 tops
- 4 perimeters
- 15% infill - Cubid
- Supports : Yes