December 29, 2023
Description
Visit my Cults3D page for more designs
There are two different files, one for the right side of the wheel and another one for the left side, where the cable cover is. No need to take the cable cover off.
You will need 4x m3x12 bolts
How to attach : Remove the original phillips screws, slide in place the holders and attach with the new m3x12 bolts. Note that you will need to use a bit of force to slide the holders in place but they will not break if printed properly.
Here are the main settings I use to print the pads with PETG
- 4 bottoms
- 6 tops
- 3 perimeters
- 15% infill
- Supports : Yes for the underside of the screw mounts
License:
Creative Commons — Attribution — Noncommercial — NoDerivatives
11
CDoucet
