GTA VI Lightbox

A GTA VI Lightbox with the palmdesign. I used this LED Stripes:
BTF-LIGHTING FCOB USB LED Streifen 1m
but you can use any led stripe you want.

You can put the led cable hole everywhere you want in the Orca (or Bambu) Slicer by adding a negative part.

Printed with 0.4 Nozzle, 0.24 First Layer Line-Width and this Filaments:

White: Bambu PLA Matte
Purple: Eryone PLA Blue&Purple
Pink: Bambu PLA Pink (from the CMYK Bundle)
Black: Sunlu PLA Black

For best results use a 0.2 Nozzle and set the Line-Width lower as 0.24.