Circular Wireless Charger Holder + Angled Stand Option

4Angled Stand for Desktop Circular Wireless Charger

Note: This stand is currently made for a 95mm wide charger. Remix versions can be made upon request from me or you can alter the design yourself to fit your needs.

Problems with Circular Wireless Charger

1. If the phone was not placed correctly, it would fail to charge
2. If the phone was shifted in the night (maybe due to an evil cat), it would fail to charge
3. If the phone needed a charge, I would have to place it flat on the desk

Now with this design, solutions were made to all these problems.

Printing Notes

• Infill: 10%
• Supports: I printed without supports, but may be helpful when printing the sharp angle at the bottom of the angled stand. Also, I suggest Tree Supports for easier removal
• Other settings were defaulted on CURA

I used PLA and printed with an Ender 3 S1 Pro for this project

Easy Assembly (Shown in last 4 Pictures)

1. Put the Charger Mold into the Angled Stand
2. Put your Charger into the charger mold
3. Put your phone in for charging!