Talaria X3 Rear Swingarm Cover

This is a cover that will fill the gap on the rear swingarm of the Talaria XXX. It will block water / mud from splashing onto the belt and other parts. The frame already has threaded holes that fit M5 screws.

Warning: I can't guarantee this will fit your Talaria XXX. The holes appear to be machined onto metal knobs that could align differently on each frame. I have 2 bikes, and the same print fit both, so I'm assuming it should work for most. I would suggest printing 2 layers of just the side with the screw holes, then test the alignment on your frame.

Bill of Materials:

2 - M5 x 10mm screws

Changelog:

2023-1-2: Added extension to attachment side gap.