Echo Show 5 Wall mount - 2 pieces

I was searching for some Echo Show 5 wall mount, but didn't found any that catch my eye.
So, using this as practice for Fusion 360, I was able to design this model.

I used this Echo Show 5 model from DockGuy ( https://www.printables.com/model/35715-amazon-echo-show-5-model ) as reference for the base, so its pretty acurate.

Added 4 pockets to glue some round magnets (12x2mm).

As I said the model is conformed by 2 parts, the one that is mounted on the wall, and the one that serves as dock for the Echo, they fit together with 2 dovetails, allowing some space behind the base so you can hide the cable.

For the screws I can't remember exactly what I used, but the hole for the screw have 5mm of diameter, and for the head 8.6mm of diameter.

Use your usual printer setting. Just add at least 3 perimeters, and 20% infill.

Hope it can serve you as it served me.