Print In Place (PIP) Calendar

Simple model for a desktop calendar.

There are two types:  One with legs for standing up, and one without legs to mount or hang however you want.

Model with legs requires gluing two arches to the main body.

Model without legs is print in place with no additional assembly required.

Great for putting on your desk or hanging on a shelf / wall to keep track of the date.

Print in any color you want and works great for multi-color printing.

If it's a little tight/stiff in the beginning, just spin it a few times and it will loosen right up.

Requires bridging but there is tolerance built in for this.

There may be filament wisps in the number opening but use flush cutters to remove it easily.

(I found a deburring tool removes it perfectly too)

this was printed on my stock ender 3 pro

There is an arrow for if you want to do 2 colors. although if you have a printer that can print in 2 or more colors or if you just want one color then remove the arrow in the slicer.

Enjoy, and let me know if you have any continuous improvement suggestions!

Thank you!