MMU-Buffer for Anybox (filament drybox)

Anybox filament buffer for MMU

Filament buffer to be used inside the drybox Anybox to keep the moisture as far away from the filament as possbile. 

That way there can be a direct and fully tubed way from the box to the MMU.

Each bufferframe is clicked to to threaded axis to keep postition. 
You need two ball bearings for each buffer wheel. The axis for the buffer wheel uses a printed M8 thread - so you need a thread cutter. That way you can assemble everything even with small space left between the buffers.

Print base and wheel with 20% infill. 

The axis/screw with 100% infill.

Link zur Anybox:
https://3d-druck-vorlagen.de/anleitung-filament-box-selber-bauen-die-anybox-v2/

I do not have any connection to the site etc. besides having bought the STLs for the Anybox.

I changed and eased my Anybox-setup changing from toploader to frontloader loader: 
https://www.printables.com/de/model/329292-filament-spool-roller-base-for-70mm-filament-spool

I figured out, that a buffer is not really needed when the filament is pulled from the top of the spool. When the MMU pulls back the filament no filament mess is happening :-)