Raspberry Pi 5 Case - Modular Snap Together

Rasperry Pi 5 Case - Modular Snap Together 

This is a remix of the excellent "Modular Snap Together Raspberry Pi Case" by Sneaks, originally designed for the Raspberry Pi 3B+ and Raspberry Pi 4.

I've updated the design to make it fully compatible with the Raspberry Pi 5 and its new Active Cooler.
Additionally, I added improved ventilation and created a variety of modular components for flexible configuration.

🔧 What's New:

Updated internal dimensions for Raspberry Pi 5

Added ventilation cutouts for use with the official Active Cooler

Created multiple interchangeable modules for different port and cooling configurations

🧩 Module Options:

➤ Without Active Cooler:

• Blank
• 2x Camera/Display
• 1x PCIe
• 2x Camera/Display + 1x PCIe
• Only GPIO
• GPIO + 2x Camera/Display
• GPIO + 1x PCIe
• GPIO + 2x Camera/Display + 1x PCIe

➤ With Active Cooler:

With open vent:

• Blank
• 2x Camera/Display
• 1x PCIe
• 2x Camera/Display + 1x PCIe
• Only GPIO
• GPIO + 2x Camera/Display
• GPIO + 1x PCIe
• GPIO + 2x Camera/Display + 1x PCIe

With hexagonal vent:

• Blank
• 2x Camera/Display
• 1x PCIe
• 2x Camera/Display + 1x PCIe
• Only GPIO
• GPIO + 2x Camera/Display
• GPIO + 1x PCIe
• GPIO + 2x Camera/Display + 1x PCIe

📁 All files are labeled with the corresponding module configuration to make selection easier.

🖨 Print Settings (Recommended):

• Material: PLA / PETG / ABS (depending on use case)
• Wall Line Count: 2
• Top/Bottom Layers: 2
• Infill: 25%
• Supports: Usually not needed