MINI - US$ Coin Sorting Vault

This is the smaller version. If you want to print the US$ Coin Sorting Vault on the Prusa MK4, you can find it here.

Rocco's Coin Sorting Vault is an absolute eye-catcher! Great design and perfect execution. 

Until a few weeks ago, I printed everything on the Prusa Mini. Now, I also have a Prusa MK4.
Back then, I couldn't print some models due to their size and was often very disappointed. Therefore, I've created a printable version of the US$ Coin Sorting Vault specifically for Prusa Mini owners here.

The MINI version looks almost identical. The sorting functionality is exactly the same.
 

What parts do you need for that?

I didn't have to modify some parts of the original versions (Rocco's bigger US$ original and my EURO MINI original). Therefore, you won't find them here, but rather with the originals.

Therefore, in addition to the parts listed here for the US$ MINI version, you still need the following to download and print:

[ A ] Parts from my EURO MINI original:
see: https://www.printables.com/de/model/686197-mini-euro-coin-sorting-vault/files

• Jamb MINI.stl
• Door Frame Cap MINI.stl
• Door Frame MINI.stl
• Top Bolt MINI x 2.stl
• Site Bolt MINI x 2.stl
• Hinge Strap MINI x 2.stl

[ B ] Parts from Rocco's bigger US$ original:
see: https://www.printables.com/de/model/655452-coin-sorting-vault/files

• Sorter Frame.stl
• Coin Slot Taller Test.stl
• Coin Sled.stl
• Gear Core x 4.stl
• Gear Teeth x 4.stl

[ C ] One of the two handle alternatives (whichever you prefer):
see:
https://www.printables.com/de/model/676720-alternative-handle-for-coin-sorting-vault
OR
https://www.printables.com/de/model/655452-coin-sorting-vault/files

[ D ] Two dowles for the vault door:
see: https://www.printables.com/de/model/673752-dowels-for-coin-sorting-vault/files

[ E ] Five bearings: 22mm outer diameter, 8mm inner diameter, 7mm high
You can buy them for little money (Example: amazon) or
you can print them. Here at printables.com, some well-rated bearings are listed. I haven't tried them myself; I bought them.

[ Optional ] Extensions
If you like, you can later expand the model. The following extensions fit 1:1 on the MINI version as well:

• Padlock frame
• Coin Lift

Printing information

Read the following information carefully. You use quite a lot of filament for this model. It would be a shame if you produce waste because you haven't read important information.

Generaly
 

• For all parts, I use 10% Gyroid infill.
• I use a 0.2mm layer height for all parts.
• All stl files are correctly aligned on the print bed.

Additional settings for the individual parts
 

- USD Box MINI Frame … Corner / Long / Short

• Infill: 100%
   

- Side Bolt MINI

• Support: see the following pictures
  
  
   

Assembly instructions

• Rocco has explained the assembly of the vault door perfectly. Please watch his video tutorial. 
   
• For the assembly of the USD Box MINI, please read the attached PDF document.

I am looking forward to your Makes! :-)

If you like this design, feel free to check out my others here.