FLSUN SR with Bambu and LGX Lite Extruder

FLSUN super racer with Bambu hotend and Bondtech LGX Lite extruder

Updated Added grille exhaust for best air guide. The grille diverts air away from the bed, especially helping with enclosed prints.

Added house fan3010 "David version"

This is a more compact and lighter configuration than the direct drive version V6 hotend with the LGX lite. The center of gravity on the effector is more optimal when lowering the motor position

Use the original fans

The height of the nozzle is very close to the bed calibration sensor support, it still needs to be verified that it can be used at the same time, but I have made the design so that it is easy to dismantle this support if necessary

The house use M3 inserts of OD4.5mm Length 3mm for fixing the bamboo heatsink and for fixing to the effector plate

The fans are threaded direct plastic housing

Testing Video: https://youtube.com/shorts/VM8bInxmK1Q

Print Settings

Printer Brand:

Flsun

Printer:

Rafts:

No

Supports:

Resolution:

0.2

Infill:

Filament: any ASA or ABS any

Category: 3D Printer Extruders