Gekko Box

A snappy supportless magnetic (or nonmagnetic) container inspired by Gekko from Valorant (Very easy assembly).

You can find 2 versions of the model, one with magnet slots (10x3mm) and a loose joint to add that snappy effect. The other has no slots for magnets and has a tighter joint to hold the cover well.

Use any adhesive to stick the “Initiator symbol” and the magnets (there are 4 of them).

No support is needed for any of the parts but you MUST rotate the parts 180 degrees on your slicer. Printed at 20% infill and 0.2 layer height, however, I recommend lowering the layer height for better results.

I will be making more of these boxes for other agents, suggest which one should be next!