Los Angeles Lakers logo (multi color)

Parameters tested with

0.4mm nozzle
0.2mm layer height
15% infill
3 top layers
Ironing on topmost layer (or all top layers) for a sleek finish

For multi material prints

Each part is labelled with the color to be used. Add all the files to your project at the same time and load as a single object with multiple parts. Then, choose the appropriate filament for each part in your slicer.

For multi color with filament change at layers

Start with white, then yellow, then black, then purple
When done with 0.2mm layer height at 100% scaling, filament changes at layers 11, 16 and 21.