Kfir Acheinu - the Hebrew Prayer for Release of Hostages. Filament painted with HueForge. | אחינו

Show your support for Israel and the release of ALL the hostages from Hamas captivity in Gaza, including young Kfir Bibas, who was only 9 months old when he was kidnapped.

Features the text of the Hebrew Prayer “אחינו” (“Our Brethren”):

“Our brethren, the entire House of Israel who remain in distress and captivity, whether on sea or on land, may God have compassion on them, and bring them from distress to relief, from darkness to light, from servitude to redemption, at this moment, speedily, very soon; and let us say Amen.”

May God reunite all of our families soon.

PRINTING INSTRUCTIONS:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Use a narrower wipe tower than usual to avoid overlap. 0.4mm nozzle recommended.

Filaments Used:

PLA BambuLab Matte Charcoal Transmission Distance: 0.6

PLA PolyLite Blue Transmission Distance: 1

PLA BambuLab Tough Cream White Transmission Distance: 10

PLA BambuLab Basic Cyan Transmission Distance: 8

PLA BambuLab Matte Ice Blue Transmission Distance: 3.5

PLA BambuLab Matte Marine Blue Transmission Distance: 2

PLA BambuLab Basic Jade White Transmission Distance: 4

Swap Instructions:

Start with Charcoal

At layer #17 (1.44mm) swap to Blue

At layer #22 (1.84mm) swap to Cream White

At layer #26 (2.16mm) swap to Cyan

At layer #27 (2.24mm) swap to Ice Blue

At layer #28 (2.32mm) swap to Marine Blue

At layer #29 (2.4mm) swap to Jade White for the rest.

Please note: I am publishing this model under a non-commercial license. However, you MAY use this model for commercial purposes IF AND ONLY IF you donate at least 50% of your proceeds to a verified charity that is supporting Israel’s self-defense efforts - including efforts to support the IDF, Israel’s hospitals and medical personnel, or Israel’s humanitarian needs. Thank you.