Voron V0.2 Door Latch - 9x3 Magnet, 16 mm screw spacing (for no-drop nut carriers)

Welp… I went to install my door latches and realized that the ya cant use no-drop carriers with the stock latches. And I had already glued my only 6x3 magnets into the latches, so I had to figure something out for the 9x3 magnets I had on hand.

Behold! A new latch with 15 mm screw hole spacing and 9x3mm magnets! You will need two latches for your build, so you'll need four magnets. Also, head on over to the corresponding door handle to have a good time.

I personally put my magnets in with alternating polarity. You, of course, can do anything you like!