Feet for the Mini Tripod [PARAMETRIC]

Thank you to Javier for the great original model!

This version adds rubberised feet to provide support for heavier rigs.

I have made a new version of the legs with a hole in, there is a parametric version of this so just change the threadMajorDiameter parameter to fit the bolt you wish to use, the stl file provided uses M3.

I apologise for the 'parametricness' of the foot in advance (I am a fusion novice) with some fusion knowledge hopefully you will understand how to manipulate the model to fit your needs (using parameters and then fixing anything that went wrong on the timeline) it should be easy to make small changes so have a play around!

If you want to use the provided stl files instead of changing the parametric ones you will need:

• 3x M3_Leg_Remix_For_Foot
• 3x M3_Tripod_Foot_20mm_Rubber
• 3x 20mm rubber pads (you choose the thickness, I used 2mm)
• 3x M3 nuts
• 3x M3x11mm bolts

Print Settings:

Legs:

• Layer height: 0.20mm - 0.35mm
• Perimeters: 2 or more
• Infill: 25% or more
• Supports: No
• Brim is recommended

Foot:

• Layer height: 0.1mm - 0.15mm
• Perimeters: 2 or more
• Infill: 25% or more
• Supports: No

Assembly:

• Push nut into the slot
• Place leg into the foot and line up the hole
• Insert a bolt and tighten so that the foot can still move freely but won't fall off
• Enjoy!