Unicorn Head

This is a basic model of a unicorn head. 

Please note that this is one of my first attempts at modeling using Blender, so please comment or direct messaged me with any way to improve future sculpts and low poly models. I would also love to see any way that you can improve this design by remixing it.

Print Instructions

• Material: PLA
• Supports: Yes
  • At the very least, supports will be required under the chin (this is an ideal use case for organic supports)
• Orientation: Print this file with its bottom on the build plate
• Variable Layer Height: Although variable layer height is not required, it improves the quality of the print.

File Variations

There are final variations at scales of 100%, 200%, 400% and 600%. Of course, you can also scale the file to your desired size in your slicer.

If you enjoy this model, please leave a like and a comment. If you have any questions, concerns, or problems, please personally contact me.

If you want to support creation of more models like this one, you can subscribe to my Printables Club (at https://www.printables.com/@Devise3D#join:451) or you can purchase an individual model on CGtraitor (at https://www.cgtrader.com/devise3d).