A habit tracker to track 5 (or 7) successful tasks. If you did the habit that day, flip the insert to indicate success!
So far the kids are doing better on their habits than myself…
Usage Notes
- Some variants of the Case Back are provided for different sized magnets.
- If you're using double-sided tape or a magnet-sheet, the “unadorned” case is easier to deal with.
- Use CA glue or epoxy to glue the case halves together; the lip should provide good alignment. Alternatively, you can try heat-welding…
- The plain insert can be nudged up via the star-hole, then grabbed. If that's not to your liking, the insert-with-lip may be more to your liking.
Printing Notes
- Print the Insert with a color change midway through.
- I've personally done this with PLA, 0.4mm nozzle, 0.2mm layers.
kitlaan
