BAMBU LAB SNAP-OFF KNIFE 9mm

I designed a remix and printed with eSUN ABS+ LIME GREEN and OVERTURE PLA MATTE BLACK.

I have noticed that the original model has some drawbacks and that's why I have remixed it.

First of all you can now use the hole to fit a keychain or to hang to the wall the cutter.

I decided to make the cap and the case shorter to reduce the print time and to have greater versatility and practicality.

I modified the cap , it fits and slides inside the case.

You can print it in ABS , PC or PAHT-CF.

You can also increase the infill up to 100% if you want.

Be careful when removing the supports, do it calmly and slowly, without hurting yourself

To lock the cap into the case, you need to insert the 2.5mm rod after you have printed them. By doing this , you will never again loose the cap, like it happened to me with the original model.

To assemble and disassemble the cutter see the description to my MKW page , you find 2 GIFs take explains you that :

https://makerworld.com/it/models/100255#profileId-108923

Choose your style and the colors you like.

For me it is very useful this cutter for opening the packages of Bambu Lab filaments that I ordered or for stripping the electrical cables of electronic components.

Give me a like and follow my page.

If you need help or you want to be printed this parts or customized in different way, just send me a message here.

Thank you to support me and happy printing.