PRUSA - POLYMAKER - OVERTURE - BAMBU LAB SPOOL DRYER COVER

I remixed the original spool cover dryer taking it from the original Bambu Lab homepage.

Changes implemented to the model

The advantages:
- Decreased model volume
- Thinner walls
- Less material to print
- Shorter printing times
- Larger quantity of holes
- Changing the position of the holes
- Holes oriented 45° perpendicular to the model axis
- Less humidity

- Added the Bambu Lab , POLYMAKER , PRUSA RESEARCH , OVERTURE logo on the top

What material to print it with

I advice Bambu Lab PC, Bambu Lab PAHT-CF and the last one is Bambu Lab ABS, this one if you only want to dry like TPU, PLA (55°C) , ABS (80°C) , ASA (80°) or PETG (65°C). About drying the ABS or ASA , you still have 10°C less , because the print bed temperature is 90°C.

How to dehumidify filaments?

Click the link below, you will open the Bambu Lab Wiki page and you will know what it the drying procedure:

https://wiki.bambulab.com/en/general/bambu-filament-drying-cover

Notice:

Check always the filament guide on the Bambu Lab homepage to check if the drying temperature to set it's correct or not. Keep this in mind!

I also measured different filament spools for the material and the cover fits spools from Bambu Lab, Overture and Prusa, as you can see in the photo.

BAMBU LAB MODEL:

The original model can be printed in 4h 41minutes using 180,58g.

This model can be finished in 3h 34minutes using 116,83g.

You save 1h 7minutes of your life and 63.75g of filament!

Using the 0.6mm nozzle you save 1h 27 minutes!

Profile:

- 0.4mm stock Bambu Lab Hotend

-0.6mm stock Bambu Lab hotend

POLYMAKER MODEL :

The original model can be printed in 4h 41minutes using 180,58g.

This model can be finished in 3h 32minutes using 115,58g.

You save 1h 9 minutes of your life and 65g of filament!

Using the 0.6mm nozzle you save 1h 42 minutes!

Profile:

- 0.4mm stock Bambu Lab Hotend

-0.6mm stock Bambu Lab hotend

PRUSA MODEL:

This model can be finished in 4 hours using 117,52g.

You save 40 minutes of your life and 63.06g of filament!

Using the 0.6mm nozzle you save 1h 35 minutes!

Profile:

- 0.4mm stock Bambu Lab Hotend

-0.6mm stock Bambu Lab hotend

OVERTURE MODEL:

This model can be finished in 3h 30minutes using 115,80g.

You save 1h 11 minutes of your life and 64.78g of filament!

Using the 0.6mm nozzle you save 1h 44 minutes!

Profile:

- 0.4mm stock Bambu Lab Hotend

-0.6mm stock Bambu Lab hotend

Color:

You choose the color you want and remember that my profiles are based on just 1 color and Bambu Lab PC.

Feel free to choose a different color and filament.

If you want an updated model or need help, send me a private message.

Give me a like and follow my page.

Thank you to support me and happy printing.