Print in the suggested orientation, with at least 3 Walls and 15 % infill.
Assembly:
- Insert the shaft into the base. This may require a little bit of force, as the tolerances are fairly tight.
- Insert a M3 bolt of at least 8 mm into the bottom of the base plate to fix the shaft to the base.
- Insert a M3 nut and bolt in the clip as shown in the picture. The bolt should be at least 8 mm long.
- put the clip on the shaft and use the bolt to fix it at the desired height.
License:
Creative Commons — Attribution — Noncommercial — NoDerivatives
Chris
