July 12, 2024
Description
This a mount to put your Pi or Similar board under the bottom plate. The parts needed will be listed below. I have a Libre Computer Solitude which is the same formfactor as the Raspberry Pi. I have the single piece bottom plate but I assume it would work on the 2 or 4 piece as well. To install it I put 4 m3 inserts in 4 of the holes in one of the groupings.
Parts used:
4x m3 heat inserts
4x m3 6 or 8mm screws
4x m2.5 8mm screws for the board
License:
Creative Commons — Attribution
7
MakerMindNexus
