January 5, 2024
Description
Parts needed to lift y axis 4020 extrusion in order to mount linear rails on the sides to use ender 3 upgrade kit.
Print instructions: if the printer will be used with enclosure I suggest printing in PETG, ASA or ABS if the chamber temp will go past 50 C.
Use at least 50% infill, 3 or 4 wall count and 4 or 5 top and bottom layers. Make it as solid as possible so there is no flex, you plate will be seated on these pieces of plastic.
License:
Creative Commons — Attribution
7
vasyl83
