Monthly Habit Tracker

A nice physical habit tracker, that's designed like a monthly calendar. The design is a few separate parts so you can choose different colors, and the front grid is a very simple and fast print to replace each new month.

In order to ‘mark’ the days that you successfully did your habit, you snap off the square from the grid. This can be done easily with a toothpick or a pen (maybe also if you have nails). The connection is a single layer so it snaps off really easily.

The grid snaps on very easily, and the title part also. I created 12 different title pieces, each with a different month of the year. I'm also including the fusion360 file so you can edit it and change the texts if you want.

Notes for printing:

• Make sure you have good adhesion - for the title part you can add a brim, but for the ‘grid’ I think it will be too hard to remove. I printed on an MK4 with PLA and didn't have problems. 
• None of the pieces require supports to be printed, just make sure they're ‘laying down’ on the bed properly.
• Be very careful when taking the ‘grid’ off the print bed - you can easily break the blocks that are supposed to snap off. 
• The ‘legs’ of the grid and title piece will probably have some stringing - at least i had when I printed mine. I carefully cleaned this up with a small pointy cutter, and then sanded very gently.