Bambu Lamps LED Spool

This is the Bambu Lamps LED Spool. Made from a Bambu Labs reusable spool, this lamp can be illuminated with a smart RGB LED strip and connected to your home automation system to be remotely controlled. It makes a very nice looking desk lamp or conversation piece within your office or shop. 

Please note that the Bambu Labs spools come in both translucent frosted plastic (preferred) or solid white. From what I can tell there is no guarantee that you will receive one or the other when ordering specific Bambu Labs materials. Either one will work but the frosted one allows light to also shine through the spool which looks nice. 

You will need the following items to complete this assembly. As an Amazon associate I may earn a small commission (at no extra cost to you): 

3D printed files: 

► YOU ARE HERE

LED Strip - the exact one I used in the video is no longer available but this is almost exact substitute: 

► https://amzn.to/48HHbZ9

Thread forming screws: 

► https://amzn.to/3RRCKEr

3M Double sided tape: 

► https://amzn.to/3TVDGdH

Bambu Labs Reusable Spool: 

► https://us.store.bambulab.com/products/bambu-reusable-spool

I would suggest printing all of the covers (front and rear), plus the LED filament diffuser in white material so light can easily pass through. The stand, screw and the color accent parts can be made in any color of your liking. I chose white and grey as they match the Bambu Labs color scheme nicely. 

PLA materials works perfectly fine and the typical 3 walls, 3 floors and ceiling layers is fine at 0.2mm layer height. Only the stand will need support material in a few locations. The LED diffuser file can be printed in normal mode - or optionally should be able to print in spiral vase mode. It is only one wall layer anyways so the result is almost identical but spiral vase mode will result in no Z seam.

 **************************************************************************** 

If you enjoy and have benefited from my content and are feeling generous I would love your support! You can "buy me a coffee" here: 

► https://www.paypal.com/donate/?hosted_button_id=V2T6MEFUGP73Y

By supporting my channel you are encouraging me to continue with this time consuming endeavor. A lot of time goes into design work, building my projects, filming the videos, editing the videos, etc. Plus it all costs money! Your generosity goes a long way in helping me bring you better content as often as I can! 

Follow me on Instagram! 

► https://www.instagram.com/embracemaking/