GoPro Hero 4, 2 Axis Gimbal for Reptile 500 MWC (Discovery Clone)

This is 2 axis gimbal for the Reptile 500 MWC (TBS Discovery Clone).

(http://www.aliexpress.com/item/REPTILE-MWC-X-Mode-Full-Carbon-Fiber-Alien-Multicopter-500mm-Quadcopter-Frame-Black/32459603563.html)

Designed explicitly for GoPro Hero 4 Black (86.3 gr) and other compatible size and weight cameras.

Printable parts, weight calculated with Nylon (PA-12) in mind.

1. Base (12.4 gr)
2. Roll Base ( 7 gr)
3. Roll Link (11 gr)
4. GoPro Cradle (15.5 gr), IMU board is per Storm32 BCG design, 16 x 19 mm with two holes 14 mm center distance. (Can be adapted to other IMU modules by breaking the 2 mm pins)

Additional parts needed aka buy parts:

1. GMB2804 (100T) Motors, x2, (41.2 gr ea). http://rctimer.com/product-1075.html.
2. Socket head cap screw, x1, M3x12. (https://mdmetric.com/fastindx/uc20_27.pdf)
3. Socket head cap screw, x12, M3x6. (https://mdmetric.com/fastindx/uc20_27.pdf)
4. Nut, Din934, x1, M3. (https://mdmetric.com/fastindx/ud02_11.pdf)
5. Rubber mounts / balls, x5. (http://www.banggood.com/Diatone-Rubber-Damping-Ball-10pcs-For-RC-Multirotors-p-973470.html)
6. [Storm32 NT Gimbal controller - Anything that can drive those motors (10 ohm)]

(https://www.banggood.com/custlink/DmDvdZLM0R) 7. Gopro strap or rubber band to secure the camera into cradle.

Please share you feedback, I will do my best to adjust if relevant.

Category: Hobby