THIS IS WORK IN PROGRESS!
The following parts are designed by me to be compatible with your Reloop turntable, but they might work with other brands as well. If so, please let me know so I can list the compatibility with your model.
Currently, you can print the following replacements:
- Turntable Feet
- Consists of three parts: Base, cushion and a rubber foot. Cushion and rubber foot are best printed in TPU or a comparable material.
- The cushion is designed to fit a M6x16 bolt, which is best glued in with superglue.
- The rubber foot is then glued to the underside of the base. If you don't want to print the rubber foot, it can also be substituted with sticky felt that was cut to size.
- Important: By no means the replacement feet will be able to work as great as the original by the manufacturer. I suggest to play around with the cushion's infill to recieve the best noise and shock absorption possible. Please let me know which settings worked best for you!
- Tonearm clip
- This clip is meant to hold the tonearm in place when the turntable is not in use. It can be attatched with a 2mm screw.
Please keep in mind that these parts are intended for personal use only and selling these is not permitted in any way! Please use responsibly!
This design is work in progress and I'm happy to recieve feedback for improvements!
nlabs
