Voronoi Wall Outlet Shower Shelf [no drilling or glue]

I love Voronoi and we were missing some more space in the shower so I designed this little shelf.

This one fits 60mm wall outlets with <23mm water outlets (see picture above). 

It is printed in 3 parts and requires some rather flexible M3 parts:

• 6x M3 screws (countersunk head, 13mm up to 26mm)
• 6x M3 heat set insert (up to 9mm)
• Optional: Grease to prevent screws from rusting

Print:
Rather flexible. I used PETG for durability and some rather fine layer heights (0.2mm) to get smaller overhangs and better rounded corners.

Assembly:
Insert the heat set inserts, apply some grease in the holes (to prevent rusting screws) and screw on the back part. Glue on the hook.
Remove your shower shower hose and put the assembly on the wall outlet. Screw back the shower hose from the left.

Also check out my Voronoi Shower Rail Shelf https://www.printables.com/model/710142-voronoi-shower-rail-hanging-shelf-no-drilling-or-g

❤ If you have questions or like this print, consider leaving a like, comment or a make. Thank you! ❤