Monsieur cuisine connect Handle V2 (LIDL THERMOMIX)

Edit: Added a version without the extra screw and a lip to avoid rotation (experimental, not tested yet)

This is the second version for the handle for the MONSIEUR CUISINE CONNECT (the copy of the Thermomix from Lidl)

I printed it with Colorfabb HT due to the high temperature resistance so it could be washed in the dishwasher at any temperature but PETG, ASA, PC should do too.

I used 0.3mm layer heigh to increase strength between layers, 40% infill and 3 or 4 walls as perimetre.

Lay the print on the side of the handle with supports for the stud where the screw passes. DO NOT print it vertically as it would weaken the structure and it could break.

I used a second screw with a spring washer and nut (M4) on the side of the handle to increase strenght on all directions when holding it.

I used a serrated washer for the main screw to prevent it from unscrewing with time-vibrations.

Enjoy!