March 21, 2024
Description
V6 Prototype Update:
As I'm currently not really motivated to further redesign the fan shroud, I thought to add the last prototype I made. I think I'll finish it in the future, but not right now. So maybe one of you can play around with it and make something great out of it.
V5 Design:
V5 is designed for two 5015 radial fans, and it utilizes one of the original Elegoo 4015 radial fans as the heatsink fan. To make the 4015 work as the heatsink fan, I had to reverse the positive and negative pins, as the pins on the PCB were incorrect, at least on my machine.
I also have adjusted the fan speed of the 4015 fan to 0.4 in my printer.cfg.
During printing, I positioned the model with the front side facing down on the build plate, supporting only the connecting points for the 4015 blower fan.
To attach the shroud to the hotend, use the original four M2 screws (add M2 washers if available) and the two M3x8 screws. The 5015 blowers require two M3x20 screws, and the heatsink cooler needs three M3x20 screws.
Screw the 5015 blower on last; otherwise, you won't have access to the two M3x8 screws to mount on the backplate.
For now, I've directly tapped the screw holes into the PLA, which has worked great so far. Mount the LED with two M3x8 screws.
Printsettings:
I'll add later:
I ordered the following parts:
Wires: Amazon Link
Fans: Amazon Link
Stay tuned for updates, and feel free to share your feedback for an enhanced 3D printing experience.
If you appreciate what I've designed so far, feel free to buy me a coffee!
https://www.paypal.me/OrzOrzOrzPP
https://www.buymeacoffee.com/orzorzorz
License:
Creative Commons — Attribution — Noncommercial
7
OrzOrzOrz
