Parametric Mizu's glasses

Since I posted this print on my Instagram, I got several questions to share the 3D file, so here it is!

I printed the frame with 0.16 layer height. After printing it I had to do some sanding for a better fit. Once the frame was finished, I temporarily glued it to a piece of glass covered with clear packing tape, and poured tinted clear resin. I used ca. 1mm rod for hinges. 

If you post yours on Instagram, tag me lynx.den, so I can see your result :).

I'm keeping my fingers crossed for your cosplays ;).

Edit: I added parametric .f3d file, so that you can adjust dimensions to fit your face. You should mainly focus on the ‘nose_gap’ and ‘rim_diameter’ parameters. The model might break if you change values too much, but it should be fine for most face proportions. If something goes wrong, just hit Ctrl+Z, and try again ;).

My making-of video: https://www.youtube.com/watch?v=yvbNUEpezH4&t=107s