Dragon Railway Pipe Track Mount System

This is a pipe-style wall mount to hold dragon railway rail tracks:

https://www.printables.com/model/346663-train-tracks-dragonrailway

The 3d fusion model is fully parametric and has options to configure these values:

• Wall angle
• Arm angle
• Track pitch angle (for inclined track)
• Distance from wall
• Hanging distance

I used these command strips:

https://www.homedepot.com/p/Command-3-lbs-Medium-Foam-Replacement-Strips-12-Strips-17021-12ESF/327142775

WARNING

The design intent was to make something that looked good on the wall and did not damage the wall. In practice, I found that any layouts required a lot of planning and measurements, parts kept breaking, the command strips kept falling off, and any small deviation in vertical position of the holder looked awful. I'll probably be re-designing a different system in the future to be more robust, but I welcome any contributions to this one as well.

If you want to contribute to this mounting system, feel free to fork or reach-out to me (ScottXN) on the dragon railway discord (linked from rambros' profile: https://www.printables.com/@rambros)