September 11, 2021
Description
I designed this to hold the charge cable when I'm not charging my Cub Cadet CC30E electric riding mower.
Printing:
I recommend PETG or ABS as it'll be outside and PLA is not a good idea. I printed with 15% infill and 90% infill around the mounting holes. If you can't do selective infill you might do 25% or higher infill. No supports are required.
Printer Brand:
Prusa
Printer:
i3 MK3
No
Supports:
No
.35 mm
Infill:
15% / 90%
License:
Creative Commons — Attribution
Okcazure
