Goggle strap retainer clip for Giro snow helmet

This is a replacement goggle strap retainer clip for Giro snow helmets. 

The tab on the left is a little shorter than the tab on the right.  When installing the clip onto your helmet, squeeze the bottom of the clip and insert the right side in first and the left tab should just slip in.

For the best strength, print the clip lying on its left side using supports (see slicer build plate picture for orientation).  I used PrusaSlicer organic/tree supports and printed it out of Duramic PLA Plus filament with 2 perimeters, 30% grid infill, 3 bottom and 4 top layers.