Leather splitting, edge chamfer, cutting tool or just scrapper for utility knife

I am using this tool for leather working. When I need to make leather thinner or chamfer the edges and it is very use full as well for cutting instead of the crescent knife. It hase big advantage - it is using Martor utility trapezoid knife 199.70 so you do not have to sharpen that. When bold just change. 

https://www.martor.com/en/products/blades/product/trapezoid-blade-no-199

Model consist of 2 part. I am printing both from ASA material as it stiff and can be easily sanded. 

For assembly you will need 4 pcs of M3 nuts, 2 pcs of M3 counter sunk screws 6 mm total length and 2pcs M3 cylinder head screw 10mm thread length.

VERY important, Angle of the bottom half  aligns with utility knife sharpening angle.

11.1.2024

I am adding protection blade protection part. Printing of this part is better with the 5mm Brim as the base is a bit narrow.