October 19, 2019
Description
https://www.youtube.com/watch?v=s-VpZlQjJVM
Make a tiny TARDIS pendant! https://learn.adafruit.com/tiny-tardis-pendant/
3D print a glowing TARDIS pendant or ornament! This easy project uses a coinc ell battery holder and three LED sequins to light up the inside of your favorite time machine.
Full tutorial: https://learn.adafruit.com/tiny-tardis-pendant/
You can print the parts in either PLA or ABS. We recommend printing the Tardis body part in either white or transparent material. The body STL file is the part that will need to diffuse the LED sequins. There are two sizes available!
Temperature @ 230c
10% Infill
2 Shells
0.2 Layer Height
90/120 Speeds
The original solids are available to modify and download from our 123D Design project page:
License:
Creative Commons — Attribution — Share Alike
Adafruit
