Genovation ControlPad CP24 Riser

This riser adds 7° of tilt bringing the total angle to 17°.

What you need is:

• 2 #8-32 ½" screws
• 1 #8-32 Nut (I used a nylon locking nut)
• 1 #8 Washer
• 1 Mini Glue Stick (5/16") for anti-slip

First embed the glue stick. Cut it to length, slightly melt one half with a flame and press into the recess.

To install, carefully unscrew the case sliding the front up and off, remove the board, screw the top in first into the brass insert, then use the nut, washer on the inside, and screw to secure through the mounting cutout; Then reassemble. You may be able to do this without disassembly.