January 9, 2024
Description
I needed a simple Hook for my headset from work. The solution was a quick Tinkercad Sketch.
The Hanger is mounted on the backside of the monitor with the help of a Tesa Powerstrip.
It extends 4cm from the edge of the display and even my big Corsair HS80 RGB fits nicely on there.
Strength is plenty enough for a normal headset. But if you need, increase the layers and walls as needed.
Current print time is just under 30 minutes in standard speed.
License:
Creative Commons — Attribution — Noncommercial
BlackEternity
